31 Comments

  1. Alien Drones
    Oktober 7, 2020 @ 12:40 pm

    Okay, just an update. I purchased the upgraded model that has the dovetail instead of the thumb wheel attachment and I have to say, it takes a simply great product to an orgasmic level, lol. The reason I switched is the thumb wheel was slightly in the way of the mode lights on the Ronin S (yes, I know that's anal), and the new version solves this. Also, the way it clicks in, has a little spring loaded pin that retains it even when loose (until you release it) and a 1/4 turn on a lever, that MATCHES the Ronin levers (yes again, anal), ooohhh, maaan… You might not like it though because the retaining pin is not symmetrical so it is only meant to attach the one way unless you switch sides on the gimbal, so no tipping the handle upside down, I think. Later! 👽🛸

    Reply

  2. Virtual Tour Guide
    Oktober 7, 2020 @ 12:40 pm

    still washing 40-50 times a day lol?

    Reply

  3. Alien Drones
    Oktober 7, 2020 @ 12:40 pm

    Thanks, man! So funny, right before I watched this I canceled the order for the exact handle you showed in the box and ordered one of these. Okay, have to admit, your intro flinging the Ronin around freaked me out a bit. 🤣 Did you use the default settings for this or some custom "sport" settings?

    Reply

  4. WIND RANGER DRONE Studio
    Oktober 7, 2020 @ 12:40 pm

    1:10 funny bro lol

    Reply

  5. ɴɪᴋᴏʟᴀɪ ᴡɪᴇʜʟ. ᴍ
    Oktober 7, 2020 @ 12:40 pm

    Woaw that was really helpful, you are amazing! Have a nice Day, and i did subscribe 🔥

    Reply

  6. TheChosenOne
    Oktober 7, 2020 @ 12:40 pm

    So, the advantage of this mount is that I think you can also mount the Smallrig mount right above it for an insane amount of mounts…not to mention that you can mount an additional two more handle grips on the sides of the Smallrig mount. To be honest, this is definitely a must have if you don't have something already connected to the side of the Ronin S.

    Reply

  7. Matthew Skelton
    Oktober 7, 2020 @ 12:40 pm

    How's the handle when its mounted the other way (upside down)? Enough room for your hand or does your knuckles hit the metal arm of the ronin-s?

    Reply

  8. Michael George
    Oktober 7, 2020 @ 12:40 pm

    You rock for bringing this accessory to us

    Reply

  9. Marcel K
    Oktober 7, 2020 @ 12:40 pm

    What kind of sickness do you have?

    Reply

  10. Vision Media
    Oktober 7, 2020 @ 12:40 pm

    Far you are a crack up.

    Reply

  11. МЕХРАДЖ - VIDEO
    Oktober 7, 2020 @ 12:40 pm

    красавчик

    Reply

  12. Farouk Zanou
    Oktober 7, 2020 @ 12:40 pm

    thank you very much for this video… very helpful n by far the best vid out there for this

    Reply

  13. TheBlacksheep1967
    Oktober 7, 2020 @ 12:40 pm

    What do you do to cover the contact that has been exposed when you take out dji cover in order to screw the PGYTECH base part.

    Reply

  14. Sites4sight Multimedia
    Oktober 7, 2020 @ 12:40 pm

    can i make videos? i dont have an accent

    Reply

  15. david valens
    Oktober 7, 2020 @ 12:40 pm

    is this the best handle for Ronin S?

    Reply

  16. TechSavvyDaddy
    Oktober 7, 2020 @ 12:40 pm

    That accessory looks awesome for real….Just recently got my own Ronin S….have used my buddy's a couple of times, loved it. Curious, what setting did you use to keep the camera level without holding the button down?

    Reply

  17. Mehmet Efe
    Oktober 7, 2020 @ 12:40 pm

    The link doesn't exist?

    Reply

  18. Martin Lepage
    Oktober 7, 2020 @ 12:40 pm

    If you check all the videos about this handle on youtube, your the only one that mount it the wrong way…Lol

    Reply

  19. Martin Lepage
    Oktober 7, 2020 @ 12:40 pm

    Man, before you do a tutorial, be sure that you mount your handle correctly. Check the box at 2:33, you mount it the wrong way… the handle is suppose to go over the camera. That's the way to install it for low shots like the Weebill Lab or Weebill S.

    Reply

  20. GiveMeTheCookie1
    Oktober 7, 2020 @ 12:40 pm

    Hey, I tried going through the link and it gives me an error page on their website. Is it sold out already?

    Reply

  21. Jeff T
    Oktober 7, 2020 @ 12:40 pm

    The hand grip link shows it’s not on their website anymore 🙁

    Reply

  22. Martin Gijselings
    Oktober 7, 2020 @ 12:40 pm

    What about the focuswheel and/or command unit? Can it be mounted with the pgytech handle?

    Reply

  23. KEN KD
    Oktober 7, 2020 @ 12:40 pm

    Thanks mate

    Reply

  24. madeinvideo.es
    Oktober 7, 2020 @ 12:40 pm

    Wow! Thanks man for sharing this! We're definitely getting one ASAP. We just wish we had it already for tje shoot we have in a couple of days, haha. But really, since the zhiyun webill s came out, we were so jealous of the way you can configure the handle… But this allow us to do exactly that with our ronin s and get more low angles, which are a total pain to get unless you are as strong as Hulk! Best

    Reply

  25. Playbox Limited
    Oktober 7, 2020 @ 12:40 pm

    i just bought now, thanks!!

    Reply

  26. THAT FILIPINO GUY
    Oktober 7, 2020 @ 12:40 pm

    What mode is the gimbal in for you to go to underslung mode with holding the trigger???

    Reply

  27. David Anderson
    Oktober 7, 2020 @ 12:40 pm

    Ok, I'll subscribe, but after that intro, I want to meet your dealer.. lol

    Reply

  28. Jamal Sham
    Oktober 7, 2020 @ 12:40 pm

    Or u know – could just buy the weebill lab/s series and save all this hassle

    Reply

  29. 30shot Productions
    Oktober 7, 2020 @ 12:40 pm

    Actual link Plz u cant click on the one u put up

    Reply

  30. Drone Innovation
    Oktober 7, 2020 @ 12:40 pm

    I noticed the screws that came with the handle did not fit with the Ronin S (2:27). What size screws did you use to mount it?

    Reply

  31. Roger Waters
    Oktober 7, 2020 @ 12:40 pm

    Zhiyun crane 3 killer ! more life for ronin s ! accessory dji like ! it's perfect ! i'm going to buy it !

    Reply

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *