26 Comments

  1. Messick's Equipment
    Oktober 10, 2020 @ 12:42 am

    Notice the redish sky, thats smoke in PA from the California wildfires.

    Reply

  2. Matt B
    Oktober 10, 2020 @ 12:42 am

    Looks like I’ll be traveling to PA for a tractor

    Reply

  3. Carmine Ciampi
    Oktober 10, 2020 @ 12:42 am

    Neil, Can you use a LP BB1266-66 Box Blade on a LX2610? Is it enough machine or better off no bigger than the 60"

    Reply

  4. Andrew Donohue
    Oktober 10, 2020 @ 12:42 am

    i bought a used BX2350, a year later i added a loader. i have a kubota dealer 3 houses down from my house. i drove the tractor there, dropped it off and picked it up when it was done.

    i DID have to add a loader valve, but as i had purchased the machine USED i did not have the option of having the loader valve on the tractor when it was purchased new.

    to anyone thinking about buying a NEW machine i would insist on having a loader valve

    Reply

  5. Noel Hastings
    Oktober 10, 2020 @ 12:42 am

    I think all Kunitz dealers nationwide needs to send you a percentage! You once made a video about cheap add-ones to make your MX series spiffier for low cost. Can’t find that video anymore. .. Can you point me in the right direction? Arm rests. Buckets Level indicator, etc…

    Reply

  6. pokerstar81
    Oktober 10, 2020 @ 12:42 am

    Wish you guys were closer. Is there any dealers you deal with at all in California

    Reply

  7. Prjndigo
    Oktober 10, 2020 @ 12:42 am

    07:30 Always ask the dealer if there are any implements that you shouldn't use and not a bad idea to discuss implement purchases through the dealer's eyes even if used or third party. Some of the savings you get when you buy a couple implements with your tractor is it's all one trip for delivery… there's a thought!

    Reply

  8. Tarheel Ron
    Oktober 10, 2020 @ 12:42 am

    Need a b2320 review

    Reply

  9. daveknowshow
    Oktober 10, 2020 @ 12:42 am

    solid information!!!

    Reply

  10. Carey Steiner
    Oktober 10, 2020 @ 12:42 am

    I love my L4760 Grand and I love “all” of my attachments 😁

    Reply

  11. S Brooks
    Oktober 10, 2020 @ 12:42 am

    Hey Neil, didn’t you do a video awhile ago about the pros/cons of 3 pt hitch chipper/spreaders? I can’t find it but am anxious to watch again. Thx.

    Reply

  12. Jason
    Oktober 10, 2020 @ 12:42 am

    Great video & advice! Makes sense to roll some of those accessories into the tractor purchase. Is it typical for Kubota to offer 0% financing?

    Reply

  13. justadbeer
    Oktober 10, 2020 @ 12:42 am

    Hey Neil, thanks for all your info! I've been watching your videos over the last few months and they are a wealth of knowledge. We ended up pulling the trigger on a B2650 last night. Aside from the loader, we also got a tiller, land plane, and a set of pallet forks (with a multi implement rebate). Also had the 3rd function valve installed for later down the road. Happy Happy Happy! –

    Reply

  14. TRENT ELSWICK
    Oktober 10, 2020 @ 12:42 am

    If you’re buying the tractor for personal use- NEVER finance. You want the bank to owe you money, not you owing the bank money. If it’s for a business go for the financing. If the business goes under you’re better protected financially. Especially if you have an LLC set up with silent partners and shadow owners or the business as a subsidiary of another business you own. That way you can keep the tractor even if the business goes under and then use it for personal use. Get creative!

    Remember that personal financing of consumer goods leads to the national debt. Consumer debt is killing this nation.

    Reply

  15. Don Brutcher
    Oktober 10, 2020 @ 12:42 am

    I Have a Kubota L6060 TLB. I was/am still a novice. The one regret I have is that my dealer did not enlighten me as to the value of additional hydraulics on the back of my tractor. How I wish I had tip and tilt!

    Reply

  16. Jeremy TV
    Oktober 10, 2020 @ 12:42 am

    Great video! I wish I had financed a couple more implements with my B2650. I second that about the front end loader – you WILL use it, and use it MORE than you could have imagined.

    Reply

  17. sphill
    Oktober 10, 2020 @ 12:42 am

    Thanks Neil for the continued awesome content. It has been pivotal in my Kubota purchase.

    Reply

  18. Sloppy Joe
    Oktober 10, 2020 @ 12:42 am

    Once again, not a video to show your wife. Tell her you need all those accessories up front!

    Reply

  19. salty 101
    Oktober 10, 2020 @ 12:42 am

    Have you ever used the third function as a remote release/connection for the bucket quick connect ? Like what the skid steer/ track loaders have. I could see it being a great feature on cab model tractors. Thanks.

    Reply

  20. Jimmy Horton
    Oktober 10, 2020 @ 12:42 am

    Great information! I didn't get 3rd function installed on my new LX2610 because I got several other implements bundled in i needed worse. I was wondering if I made a bad decision but feel better about adding it myself next spring. Thanks!

    Reply

  21. John Bradley
    Oktober 10, 2020 @ 12:42 am

    As always, great advice from the "sage" of tractors! 👏👏👏

    Reply

  22. Russelle Wannell
    Oktober 10, 2020 @ 12:42 am

    Good advice, Kubota is a top brand cheers from OZ.

    Reply

  23. Foo Manchu
    Oktober 10, 2020 @ 12:42 am

    Neil … buying an L2501 … is there any labor cost saved buying an enclosed cab initially?

    Reply

  24. Kevin McCarthy
    Oktober 10, 2020 @ 12:42 am

    I have no intention of buying a tractor as a city dweller with an HOA, and I do not live in your service area anyways. Despite that, your videos are so open, honest, and informative I have subscribed and if my needs change over time I hope to be able to purchase from you.

    Reply

  25. Michael Romanello
    Oktober 10, 2020 @ 12:42 am

    Lots of great stuff! Thank you for all your input and info

    Reply

  26. Fat Daddy Stacks
    Oktober 10, 2020 @ 12:42 am

    Great Video!

    Reply

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *